CO2 LASER ENGRAVING & CUTTING MACHINE-G SERIES Main Configurations Introduction

LARGE FORMAT WORKING AREA

With an aluminum strip table, users can cut hard and inflammable materials such as acrylic, cardboard and wood.

The strips are separate and removable, so that uses can remove them as needed based on material in order to avoid laser reflection and get a clean cutting edge.

The G series features a high strength body, and uses the most popular steel pipe welding structure in order to ensure the high speed, high precision and long-term stable operation.

OPEN ARCHITECTURE AND DUAL DIRECTION MATERIAL LOADING

The G series laser cutting machines use an open architecture to ensure easy loading and unloading of large workpieces.

Users can load the work pieces from front to back or left to right and can pick up processed parts on every corner of the table with ease.

DEEP COLLECTING BAY AND PICKING UP DRAWER

After processing, small parts and parts without a supporting strip under them will drop into the collection bay to avoid interacting with the laser.

Users can retrieve them simply by pulling out the drawer.

HIGH PRECISION BALL SCREW MOTION SYSTEM

Unlike a low rigidity belt motion system, the G series is equipped with a high precision ball screw motion system with a much higher response rate.

Users will find less shape distortions in the same motion control settings, especially in cases such as a small circle, fast turn or sharp corner.

There is no vibration or resonance from the belt, which leads to no adverse effects on the cutting edge roughness.

LASER SOURCE WITH GREAT COST-PERFORMANCE RATIO

The G series laser equipment can be equipped with a 130W or 150W glass CO2 laser tube.

The 150W laser can cut acrylic up to 1.1-/8′ thick (30mm) making it the best on the market.

If users seek to do a lot of cutting on very thick material and want to be more productive, we recommended our metal packaged, dual glass tube combined with a 260W CO2 laser.

Users will get more done without sacrificing the processing quality.

INDUSTRIAL CHILLER

The G series laser is equipped with a high quality industrial chiller to ensure the continuous and stable output of the laser.

LASER HEAD

The G series laser cutting and engraving machine can be equipped with a single or dual heads according to laser configurations.

Users can easily adjust the space between the two heads.

Our laser head has 2 installation positions for the focus lens, with the same focusing space between the nozzle and the workpiece.

The lower position if for 2″, ideal for customers who need an extremely thin cutting slit.

The upper position is 4″, ideal for general purpose cutting.

The reflection mirror adjustment is designed to be stable and easy to use.

With 3 adjustment screws, it is easy to align in any condition.

The laser engraving machine is also equipped with an air assist assembly with a flow adjustment on the laser head.

By directing a steady stream of compressed air across the cutting surface, the possibility of flaming, scorching or charring is reduced when cutting materials such as acrylic or wood.

HIGH-QUALITY OPTICS

Our G series laser engraving machines are equipped with optics produced in America in order to produce a high quality and consistent laser beam across the entire working area.

This achieves a better cutting and engraving quality.